RealSea’s SFP-GE/FE-T is a small, hot-swappable RJ45 electrical port module, compliant with Gigabit Ethernet standards and SFP Multi-Source Agreement (MSA) standards,supporting 10M/100M/ 1000M transmission rate. CAT5 class network cable transmission distance of up to 100 meters, low power consumption (less than 1W), good electromagnetic compatibility, compatible with various brands of hosts, widely used in data centers and enterprise networks. Access to the PHY chip registers is via the I2C interface. Meet the certification requirements such as RoHS.
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Support 10/100/1000BASE-T operation in host systems with SGMII interface
RJ-45 connector
General Specifications | ||||||
Parameter | Symbol | Min | Typ | Max | Unit | Remarks |
Data Rate | DR | 10 | 1000 | Mb/sec | 1 | |
Cable Length | CL | 100 | m | 2 | ||
Bit Error Rate | BER | 10−12 | ||||
Operating Temperature | TC | 0 | 70 | ◦C | 3 | |
Storage Temperature | TSTO | -40 | 85 | ◦C | 4 | |
Supply Current | ICC | 320 | 375 | mA | ||
Input Voltage | VCC | 3.14 | 3.3 | 3.46 | V | |
Maximum Voltage | VMAX | 4 | V | |||
High Speed Electrical Interface Host-SFP | ||||||
Single ended Input swing | VIN PP | 250 | 1200 | mV | ||
Single ended output swing | VOUT PP | 275 | 800 | mV | ||
Rise Time /Fall Time(20%-80%) | tr/tf | 175 | ps | |||
Tx Input impedance | ZIN | 50 | ohm | 1 | ||
Rx Output impedance | ZOUT | 50 | ohm | 1 | ||
High Speed Electrical Interface Transmission Line-SFP | ||||||
Line Frequency | FL | 125 | MHz | 1 | ||
Tx Output Impedance Differential | ZOUT TX | 100 | Ohm | 2 | ||
Rx Input Impedance Differential | ZIN RX | 100 | Ohm | 2 |